Epic Test Code LAB441A Protein, Total: Urine, 12 hour
Performing Location(s)
BMC
Specimen Type
12 hour urine
Volume Required
Entire collection
At least 10 mL urine needs to be submitted to testing lab.
- Multiple test can be performed from this volume. For question please contact the lab at 547-3975.
Preferred Container
24 hour urine collection container with no preservative
Storage Requirements
Keep urine refrigerated during the collection period.
Transportation Needs
Deliver specimen to the laboratory at the end of collection. If transportation is expected to exceed 1 hour, provisions must be made to keep the urine chilled
Causes for Rejection
Mislabeled or unlabeled specimen
Bloody specimens
Greater than 10% of total volume lost
Inappropriate urine preservative used
Specimen not refrigerated
>12 hrs room Temperature
>24 hrs Refrigereated
Limitations
This methodology is prone to aminoglycoside interference. The presence of Neomycin, Gentamicin, Tobramycin, Kanamycin, Geneticin, Streptomycin, Amikacin and/or Dihydrostreptomycin will falsely increase the Protein result in urines tested by this Fujita method.
Specimens with visible red cells or hemolysis should be avoided since hemolysis increases Urine/CSF Total Protein results (at 25 mg/dL hemoglobin)The sensitivity of the Urine/CSF Total Protein method is 2 mg/dL [20 mg/L] and represents the lowest concentration of urine or cerebrospinal fluid protein that can be distinguished from zero. This sensitivity is defined as the concentration of two standard deviations above the 0 mg/dL [0 mg/L] level (n=20).
Reference Values
Population | Units | Reference Range |
All populations | mg/12 hours | <75 |
Includes
Urine Total Protein, Urine Protein Output
Additional Testing
A urine creatinine (CPT: 82570) is performed and billed on all requests for 12 hour urine chemistries
Additional Information
Refer to 24 hour Urine Collection procedure while only collecting for 12 hours.
Days of Analysis
All
Methodology
Beckman AU/Dx Series
CPT Code
84156
Last Updated
30-July-19